Used Antminer S19j Pro 92T

$920.00

Used Bitmain Antminer S19j Pro 92T

5 in stock

C20 to dual C13 power cable 14 AWG with 12 AWG trunk

C20 to dual C13 power cable 14 AWG with 12 AWG trunk

Vnish Install

Add this product to your order with any compatible miner, and we'll install vnish firmware for free

EPic UMC Control Board For S19J And S19 XP Series

DEVFEE FREE 0%
The Epic control board has a voltage optimizer feature that optimizes voltage output to increase efficiency and stability.
The board is designed for ultimate stability and predictability, with no reboots during tuning.
It has a perpetual tuning feature that optimizes the voltage as temperature changes and future updates will take into account factors like system heat.
The firmware is designed for ultimate stability and predictability and is pushed across all supported miners.
The control board has been successfully tested against competitor products from a voltage point of view and is considered 90-95% compared to any auto-tuning without a dev fee
The control board is designed to work unilaterally with every piece of software and hardware and has been tested against different environments to ensure stability.

x
Compare Added Add to Wishlist Browse Wishlist

SKU: 100-191903-092-2 Category: Tag:

Description

Product

  • Version: Bitmain Used Antminer S19j Pro 92T
  • Model:
  • Crypto Algorithm/Coins: SHA256/BTC/BCH
  • Hashrate, TH/s: 92 ± 3%
  • Power on wall@25℃, Watts: 2714 ± 5%
  • Power efficiency on wall @25°C, J/TH: 29.5 ± 5%

Power Supply

  • Power supply AC input voltage, Volt (1-1): 200~240(1-3)
  • Power supply AC Input Frequency Range, Hz: 47~63
  • Power supply AC Input current, Amp(1-2): 20

Hardware Configuration

  • Network connection mode: RJ45 Ethernet 10/100M
  • Miner Size (Length*Width*Height, w/o package), mm(2-1): 400*195.5*290
  • Miner Size (Length*Width*Height, with package), mm: 570*316*430
  • Net weight, kg (2-2): 14.6
  • Gross weight, kg: 17

Notes

(1-1)Caution: Wrong input voltage may probably cause miner damaged
(1-2)Max condition: temperature 40°C, altitude 0m
(1-3)Two AC input wires, 10A per wire
(2-1)Including PSU size
(2-2)Including PSU weight
(3-1)When the miner is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.