Posted on Leave a comment

How To Setup Your New Bitaxe

Unbox the Kaboomracks chassis and remove its contents.

Slide the two chassis legs into their designated slots on the back of the Kaboomracks chassis. Ensure they are fully inserted and snug against the chassis.

Connect the power supply to the barrel jack connector located on the right side of the Bitaxe. Upon connection, the Bitaxe will power on and display “connecting to my SSID,” indicating that the ESP32 chip is attempting to establish a Wi-Fi connection.

On your computer or smartphone with Wi-Fi enabled, locate and connect to the Wi-Fi network named “Bitaxe_XXXX.” Once connected, your device should automatically open the AxeOS GUI. If it does not, you may need to manually type in to access it.

Navigate to the settings page within the firmware interface.

Input your Wi-Fi SSID, password, and pool information into the designated fields within the settings menu. Once completed, click the “RESET” button on your Bitaxe to apply the changes.

Your Bitaxe is now configured and ready to begin hashing. Best of luck, and thank you for supporting the Bitcoin network!

Leave a Reply

Your email address will not be published. Required fields are marked *