Notes:
The entire process is done by downloading a file and flashing it via the firmware. There is no need to unzip the file or flash the Micro SD Card.
Step 1:
Go to https://kabo.om/firmware and click on “Bitmain Antminer X19”.
Step 2:
Determine whether your model has a Beagle Bone control board, or a Xilinx control board, and click on the appropriate link.
Step 3:
Click on the appropriate model to download firmware update under the section titled “Web Update Images.” There is no need to unzip the file.
Step 4:
Log in to miner and click on VNISH in the bottom left corner.
Step 5:
Upload the downloaded .tar file and click flash miner.
Step 6:
The Miner will reboot, and after a minute or two, the system will be updated. Enjoy the update.